Powered bookshelf speakers. Weight: 14kg. Finish: Solid Bamboo.
3 year warranty
Built-in power amplifiers
Improved thermal management
RCA and mini-jack audio inputs
Front panel volume control
USB power charge port
Variable preamp audio output
Full-size 5-way speaker binding posts
Custom Kevlar woofers and silk tweeters
Hand-built MDF wood cabinets
Advance tuned cabinet with rear-ported waveguide
Stand-mount 1/4" threaded inserts
Any computer (Mac or PC)
iPod, iPhone, and iPad (all iDevices)
Audioengine wireless audio adapters
Apple Airport Express + AirPlay
Any product with mini-jack or RCA outputs
(1) A5+ powered (left) speaker
(1) A5+ passive (right) speaker
(1) Remote control
(1) Speaker wire (16AWG), 3.75 meters (~12.3ft)
(1) Detachable power cord
(1) Mini-jack audio cable, 2 meters (~6.5ft)
(1) RCA to RCA audio cable, 2 meters (~6.5ft)
(2) Cloth speaker bag
(1) Cloth cable bag
(1) Setup Guide
(1) Product line brochure
1" thick MDF cabinet
5" Kevlar woofers with advanced voice coils
20mm silk dome tweeters with neodymium magnets
Torroidal power transformers
Made from renewable and sustainable solid bamboo - no veneers
No stains or paint used - naturally "carbonized" finish sealed with hand-rubbed water-based satin polyurethane
Unpack and place them where you want and plug in the AC cord. Connect the included speaker wire from the active speaker to the right passive speaker. Then plug in your music (iPhone, iPod, computer, TV, etc.) with the included cables and you're ready to go. Our powered speakers are an all-in-one solution with no extra amps or components needed!
Most turntables with a built-in preamp that we've tested don't seem to need to use a ground connection for good results. If you're using a turntable with an external phono pre, and it has a ground post, you may want to run the ground from your turntable to the phono pre.
The A5+ is not officially supported by any universal remotes. You can however use a learning remote to copy the signals being sent by the A5+'s remote. Check with the manufacturer of your remote to find out if it supports learning IR codes.
Yes! We've been notified that the Android App ZappIR supports the A5+s. So if you have a phone with an IR blaster like the HTC One or the Samsung Galaxy S4 you can use the App to raise or lower the volume of your A5+s with your phone!
The volume control on my A5+ is acting strange, or not responding at all. What do I do?
Try turning your A5+s off and then back on. Since the A5+ volume control is a digital encoder, it uses a microprocessor to attenuate the volume. Like most sensitive electronics if left on for an extended period of time, you may eventually experience unexpected operation. Not to worry though. If this does happen, simply "reboot" your A5+s, and they should go back to working like you'd expect them to.
Some turntables do not have a built-in preamp therefore you will need to add an external phono preamp between your turntable and the A5+. Many turntables, however (such as the Music Hall USB-1 or Audio Technica AT-LP120) have a built-in preamp and include a switch on the back for "line" or “phono”. For Audioengine powered speakers select "line".
We don't endorse any specific brand or model of floor stands. A couple of companies other customers often mention have models that work well with A5+s are Sanus and Omnimount. The insert is not designed to support the full weight of each speaker though, so we don't recommend using single point mounts with no other support mechanism (like most wall mounts).
Absolutely! Use the computer's headphone output, soundcard, or DAC audio output from your Mac or PC directly into Audioengine speakers and you're good to go. PC, Mac, laptop or any computer.
Some turntables will need a preamp so we recommend to try your turntable without a preamp first to see how it operates.
We have been testing the Airplay solution in our labs, and have found that the technology is not really there yet. Airplay is really difficult to set up, and there are many drop-outs during operation, as well as a lot of noise on the line in most cases. Many reviews of the technology mention this as well.
In the meantime, we can recommend the Apple Airport Express as an alternative; you'd only need one with one set of A5+s or A2s. Just add the Airport Express to any Audioengine speaker system for a great Airplay solution!
The USB port on Audioengine 5+ speakers was designed to be for power charging only, but don't despair - we've also included an audio input next to the USB port to plug your music into.
One of the reasons Audioengine speakers have such amazing bass in such a small package are the designs of the bass ports on each speaker. These aren't just holes or slots in the cabinets, but specifically shaped openings with tubes designed with precise calculations. The result is incredible low end with minimal audible air turbulence. These are effectively mini-subs built into each speaker, allowing Audioengine speakers to be used with or without a separate subwoofer. It's also worth mentioning that we don't use any enhancement circuits to add fake bass, so what you'll hear is real bass, really low and clean.
Audioengine powered speaker models have a built-in power amplifier in the left speaker so you won't need a stereo receiver or other extra components for power.
There are a few notable differences but both designs function basically the same. “Active” and “powered” speakers refer to speakers with power amplifiers built into either one speaker or both. Audioengine speakers were designed with the power amps in the left speaker to make connections easier as they only require one power cord and all connections are on the same speaker. So it’s time to sell that big old stereo receiver and make the switch!
All Audioengine speakers are video and magnetically-shielded, however "GSM buzz" cannot be blocked by magnetic shielding. What actually causes this is your phone being in 2G or "EDGE" instead of 3G or 4G. For best results when using your phone as a music source, ensure that it's operating on 3G (or 4G).
If your computer headphone output doesn't sound so good, check out our wireless adapters and DACs or Google USB audio interface, USB DAC or similar.
Yes, there are 2 audio inputs on the A5+ so connect the Airport Express to one input and the variable output from your TV into the other. Both inputs are "open" or active so you can leave 2 audio sources plugged in at the same time with no need to push any buttons to change sources.
Every setup is different but we generally recommend leaving your speaker volume at a fixed volume level, and then using your music source (iPod, computer, TV, etc.) to set and to also control the volume.
There are various theories but rooms and tastes are different so it's tough to specify a correct placement. We suggest you experiment with different locations to see what works for you. As a general rule of thumb for the best sound stage balance, the speakers should be equi-distant from side walls and a different distance from rear walls. For the best bass response on rear-ported speakers (like Audioengine 5+), we recommend keeping a minimum distance of 6-12" between the rear of the speakers and the rear wall. Our front-ported speakers (such as the Audioengine 2 or P4) do not need any rear panel clearance for better bass but we recommend keeping them a few inches from the rear wall for adequate ventilation.
Swapping speaker placement won't have any negative effect on the soundstage or quality/clarity of the speakers. This will simply give you the reverse of what the artist intended for you to hear (and if you want the correct L/R audio then swap the RCA L and R from the audio source to the speakers).
Due to the electronics, cabinet materials and finish it's not a good idea to drill into your speakers. A5+ includes 1/4" threaded inserts on the bottom of each cabinet, which are for securing to floorstands, but here are 3 clamping wall mounts recommended by customers:
Sure. For the best audio performance we've included 12 feet of 16 gauge wire with each powered speaker system but any speaker wire will work. The speaker binding posts on the back of each cabinet will accept bare stranded wire, however if you want to terminate the wires we recommend using spade or pin type terminals.
Amplifiers are already built into our active speakers but if you wish to use Audioengine speakers with your A/V receiver or integrated amp, take the line-level "preamp out" from your receiver and connect it to one of the Audioengine inputs.
Not necessarily. For example, Audioengine speakers and amplifiers are very efficient and designed together as a system so therefore we get more volume output than stereo receivers or amplifiers that might higher wattage or power numbers. Due to this tuning we achieve big sound outputs with less power than required by other systems.
We're firm believers that two quality speakers will always sound better than multiple speakers together in a single box, regardless of the technology used. There are some decent all-in-one systems that simulate stereo and surround sound from a single source, but most fall short as they can't accurately duplicate a wide sound stage with imaging as complete and rich as Audioengine speakers (yeah, that's bragging a bit but judge for yourself and let us know!).
Even though the Audioengine 5+ has a big and tight low end which will easily fill a room and rival floor standing speakers many times their size, you can also connect a powered sub if you wish (or connect Audioengine speakers to your sub's line-level output). You can even connect our wireless W3 adapter to your A5+ powered speakers for a wireless subwoofer.
Our wireless adapters and wireless DACs will do the job. These products allow you to stream wireless audio from any source to our speakers and/or subwoofers. Apple's AirPort Express with Airplay or iTunes is another low-cost option to send music out to multiple speakers in other rooms.
Sure, just connect the SONOS analog audio outputs to the A5+. Use our passive P4 speakers if you have a SONOS CONNECT:AMP.
Audioengine speakers not only work well with iPods and iPod docks, but were also designed to connect easily to all other audio products. We feel that Apple docks do an excellent job so we didn't want to waste resources trying to design and integrate a dock into our speakers only for it to become quickly obsolete.
Audioengine 5+ and A2 speakers can be easily connected to the audio output on most TV's and will give you a greatly enhanced TV audio experience with a wider soundstage and better imaging than a sound bar.
Although many TVs have only one audio output, which typically defaults to "fixed", this setting can be sometimes be changed to "variable" via the on-screen menu. Also try your TV's headphone output or the audio outputs direct from your satellite or cable box. The A5+ includes a remote control, which is an option as well.
Both inputs are "open" or active, so you can leave 2 audio sources plugged in at the same time with no need to press any buttons!
Our woofers are made of Kevlar and the tweeter domes are silk. Both of these materials are very robust and can handle quite a bit, therefore we decided against grill covers as they tend to negatively color the sound. Even though our speakers do not have grills they are still cat and kid-friendly!
Yes, just switch the voltage selector on the A5+ rear panel to match the AC power in your country before powering them on. The A2 speakers use a switching power supply so it will automatically convert to the different voltage for you. The power cable is detachable on our powered speakers which makes it convenient to replace the AC plug with a different type if you don't want to use an adapter plug.
Sure, and if you do so we recommend that you position each so the tweeters are facing outward.
Yes, absolutely. All your A/V gear with an RCA or mini-jack 1/8" connector (even a headphone jack) will work great with Audioengine powered speakers.
Connect the NuForce line out into the A2 (or A5+) audio input. Simple to connect and sounds great!
Hum or buzz in the speakers is usually caused by something external to the speakers which is coupling noise into the speaker system, either through the AC lines, cordless phone, wireless router, or directly from the source input. A common reason is that the system is set up such that a "ground loop" results. Basically, a ground loop occurs when the AC power grounds and the system signal grounds are not at the same electrical potential. Refer to our online Setup Guides for a list of things to try.
The A5+ was designed with the user's listening experience in mind and are not marketed as pro audio mixing monitors. However, Audioengine has its roots in the studio monitor world and the A5+ is quite good for this purpose. We've had customers tell us they use these for nearfield listening and music editing with excellent results.
The A5+ remote has a SLEEP button, which when pressed puts that A5+ into a low-power model so you can leave the speakers on all the time. Check the A5+ Setup Guide for more information.
We use 2-Pin non-polarized IEC 320-C7 cables, which is common and can be purchased at most electronics stores.
Sure, for A2 you will need about 50-60 watts and for A5/A5+ about 100-120W.
If the problem persists please provide us with the results of your troubleshooting. Please also include the date, purchase location, and serial number for warranty purposes. Please contact your dealer or our distributor in your country for further assistance.
"I can say that Audioengine produces the best consumer computer speakers available in existence. And that’s saying a lot."
"Our current favorite pair of 2.0 PC speakers overall, the Audioengine 5+ delivers stellar sound quality, impressive bass punch, and flexible connection options."
"There’s a reason Audioengine has moved from a couple of guys hauling speakers to reviewers across the country to a respected brand: The company makes good stuff at reasonable prices."
"A5+ included in Beatweek's "Speakers + Audio, The best for 2013""
"Overall, the speakers are definitely getting a 10/10 & I would highly recommend purchasing them."
"Forget about the MM-1, forget about the Companion 5, forget about the BeoLab 4. If you’re looking for the best pair of all around speakers for your computer, A5+ is it."
"For $399, yes I'm going there, I'd say that the Audioengine 5+s give you more than you've given Audioengine."
"...the most natural-sounding stereo experience I’ve ever heard from a small system. The audio is phenomenal."
"You're going to be hard-pressed to find a 2.0 system that sounds better for the money and has the 5+'s connectivity options."
"The A5+ represents an uncommonly good value in today's fractured consumer audio marketplace, and a bonafide entry-level high end product."
"This tiny system really trumped some of the larger systems out there costing thousands more."
"The Audioengine 5+ is an excellent follow-on to original A5. Their rich deep bass and shimmering highs bring new life to your music library."
"For $399 the A5+ delivers more than enough music to be satisfying, even if you’re used to listening to far more expensive gear."
"Seldom is any product such a safe recommendation. Sure is nice when that happens."
"If you have the cash and are looking for something in the audiophile market, then look no further than this premium speaker set."
"In particular, we loved the dynamics and spatial imaging. These speakers are easy to set up, easy to use, easy on the ears."