Under the order
449.00 zł 

Audioengine W3R

Category :
Wireless adapter
Brand :
Article :
8 19955 26002 1
Made in country :
Stany Zjednoczone
Destination :
Color :

Wireless adapter add-on receiver. Finish: Black.

3 year warranty

Share this:

Convenience, Expanded

The W3R Add-on Receiver is an expansion kit for your W3 Wireless Audio Adapter. You can add up to 2 W3R add-on Receivers for a total of 3 zones. It connects wirelessly to your existing W3 setup, and can output great sounding audio to any product with mini-jack or RCA audio connectors. Add sound to an additional room, or even make your Audioengine S8 Powered Subwoofer wireless.


Easy setup, connects in seconds
Works with Mac or PC (or without a computer)
Plug-n-play, no software to download or install
Super-compact size, no batteries required
100 ft (30 m) range with no dropouts or interference
CD-quality stereo sound with no reduction in audio quality
Plays all music formats from any media player
Replaces any RCA or mini-jack (3.5mm) cable!

Works With

Desktop computers, laptops, notebooks
Flat panel TVs with an analog output
iPods and all other music players
Internet radio and network music systems
DVD/CD players
Videogame consoles
Digital radio and satellite receivers
Subwoofers and surround sound receivers
All other products with 1/8" inch-jack or RCA connectors!

What's in the box

(1) Wireless Audio Receiver
(1) USB AC power adapter
(1) RCA adapter "Y" cable (12")
(1) Mini-jack (3.5mm) audio cables (20")
(1) Setup Guide

W3R Add-on Receiver for W3










ADC: CS5343

Output: analog mini-jack

Full scale output: 1.0Vrms

Output impedance: 470 ohms

Power source: USB power adapter

Power requirements: 150mA, 5V

SNR: 95dB

THD+N: 0.01%

Crosstalk: -65dB

Frequency response: 20Hz to 20KHz, +/- .2dB

Wireless range: >100ft

Latency: <20ms

Product dimensions: 100x30x10mm (LxWxH)

Shipping weight: 1 lb

Included accessories

minijack cable (20"), minijack to RCA adapter (12"), USB power adapter


Operating Temperature: 32 to 95 degrees F 
Non-operating Temp: -4 to 113 degrees F 
Relative Humidity: 5% to 95% non-condensing


The W3 utilizes the CS4344 DAC, a solid, well regarded industry mainstay. Due to the CS4344's's high signal-to-noise specs, the W3R presents impressive low noise and low distortion characteristics.

How can I switch between my computer speakers and the W3 on my Mac?

Easily switch between speakers and W3 in the Status Bar on a Mac without having to go into System Preferences/Sound to change inputs and outputs with the Audio Switcher program available here; spikesoft.net/downloads.php#as.

Does the W3 transmit a stereo signal?

Yes, each Sender/Receiver W3 pair transmits 16-bit stereo audio.

Can the W3 (and W2) handle streaming lossless audio file formats such as Apple Lossless?

Yes, both wireless adapters transmit any audio file format with no compression or loss.

Do I need to install any drivers for the W3 wireless adapter?

The W3 is natively compatible with Windows Vista/XP/2000/7/8 and Mac OSX. There are no drivers or software to install.

Can I use my computer speakers and the W3 at the same time?

The W3 essentially acts as your computer's sound card; so it is an either/or option, you either select your internal sound card to use or the W3. To use your computer speakers you simply select the sound card in your device settings or remove the W3 sender unit from your computer.

W3 has a USB connector on the Sender and another on the Receiver. Does this mean that 2 computers required?

No! You don't need a computer to send wireless stereo audio - just power for the W3 Sender and Receiver dongles and RCA or mini-jack inputs and outputs on your music gear.

What wireless technology does the W3 use? Is it RF, FM, Bluetooth, 802.11, or something else?

The W3 is based on a proprietary wi-fi technology that uses the same frequency bands as 802.11.

The W3 seems to be designed for a computer but can I also send audio from a stereo located in one room to powered speakers in another room?

Yes, each Sender/Receiver W3 pair transmits uncompressed stereo audio from a computer or any analog audio output.

Can W3 be used to send music from my Onkyo surround sound receiver to a pair of Audioengine powered speakers for rear surround speakers in a 5.1 system?

Yes, simply connect the W3 Sender to the rear channel preamp outputs on your surround receiver then connect the W3 Receiver to an input on Audioengine or any other powered speakers. The W3 has stereo (1/8") inputs and outputs that will also connect to RCA connector with the use of the included RCA Y-cable adapter.

I would like to use the W3 to make my subwoofer wireless. Can I do this?

Sure. Connect the W3 Sender to the subwoofer outputs on your A/V receiver and then connect the W3 Receiver to the audio inputs on your subwoofer. There are stereo 1/8" mini-jack inputs and outputs on the W3 that will allow you to make an RCA connection with the use of a Y-cable (which is included).

I'm interested in the W3 wireless adapter and the A2 speakers to extend TV sound into another room. Can I do this?

Yes, connect the W3 Sender to the line-leve outputs or headphone jack of the TV and the Receiver. You'll need a second USB power adapter or iPod charger for this application. These power supplies are inexpensive and can be found at your local Radio Shack or electronics store.

How do I use the W3 to get music to different stereo systems around my house?

To do this you would use multiple sets of the W3 to send wireless music throughout your house. We have customers that daisy-chain the W3 (and W2) together from the output of one audio system - your stereo or our powered speakers in the living room, for example - to another system in another part of the house such as a Bose Wave radio in the kitchen. This way you can either control audio from their computers or iPods, or even without a computer from any other audio gear depending on how you connect the W3 Senders and Receivers.

Can one W3 Sender transmit music to more than one wireless Receiver?

The W3 can transmit to up to 3 receivers simultaneously.

What is the full frequency response of the W3 and what do the frequency numbers shown in the W3 Setup Guide mean?

The full frequency response is 15Hz to 22KHz, +/- 1.5db. The numbers shown in the W3 Setup Guide are measurement points and not related to the overall bandwidth of the system. There's not need to show a spec for frequency range as the system transmits uncompressed PCM stereo audio (CD-quality) over using a protocol specifically designed for audio.

What makes Audioengine wireless products better than other wireless systems?

The features that we feel make our system better than most wireless products currently on the market are the overall ease of setup, fixed low latency, audio quality, lack of dropouts, and high interference tolerance - all the good stuff that's important for a wireless product to be of any real use.

What is the latency (audio delay) of the W3 system?

The W3 latency is under 20ms so it's perfect for using with video - home theater surround or basic 2-channel audio. Can I use the W3 for my podcasting studio? I want a wireless mic to my computer's audio input? Sure, this is a great application for the W3. You can use the W3 to replace any RCA or mini-jack cable, with or without a computer!

Why is only 1 AC power supply included with the W3?

We agonized whether or not to include 2 chargers in the box but figured that most people these days either have an iPod charger or an extra USB phone charger. These power supplies are inexpensive and can be found at your local Radio Shack or electronics store. We also have extra USB adapters available through our web store - http://audioengineusa.com/USB-Power-Adapter.

Why don't the W3 Sender and Receiver include rechargeable batteries inside?

We considered adding batteries but decided not to as this was primarily designed as a wireless connection from your stereo receiver to a subwoofer or from a laptop to your stereo or powered speakers. There are, however, 3rd-party battery packs available and a quick Google search will turn up some inexpensive options that work great!

Does the W3 adapter work in a car and if it does, how so?

If you car has an auxiliary input on your car's stereo system (either 1/8" or RCA), then simply connect the W3 Receiver to a USB car power adapter and the audio output from the W3 Receiver to the audio input on your stereo system.

Will any USB power supply or charger work with the W3?

Yes, any USB power supply adapter or iPod charger will work to power the W3 Sender or Receiver.

If I have 2 USB ports on my computer can I connect 2 W3s?

Two W3s can be used on one computer if you have two free USB ports. You would need to change the selection in your computer's audio preferences to switch between each Sender. Also, make sure to leave at least 6 inches between the units so there is no interference.

Can I set up wireless to my Audioengine S8 subwoofer and then another W3 wireless Sender/Receiver pair to my A2 speakers?

Yes, you can use multiple W3 sets (up to 8) to send stereo audio to different locations or up to 3 receivers with one sender unit.

I own a Sony 7.1 STR Receiver and would like to use the W3 Wireless Audio Adapter to send a surround sound signal to my Audioengine A2 speakers. Can I do this?

Sure, as long as your amplifier, preamp, or receiver has RCA preamp outputs you can connect the W3 to send wireless music over to your A2 powered speakers. Very cool!

If I plug the W3 Sender into my computer's USB port do I also need to connect a cable from the Sender's input into my Dell laptop's headphone jack?

No, the W3 Sender will transmit USB audio directly to the Receiver so there's no need to connect to the headphone output on your computer.

I'd like to watch TV via headphones so that I don't disturb others and I have a Bose headset. Can I send wireless audio via the W3 wireless adapter from my TV to my Bose Quiet Comfort headphones?

Yes, the output of the W3 works great with headphones and you can control the volume with the TV remote.

Are there any applications for the Mac where I can switch between the W3 and my internal speakers or headphones without unplugging the W3 Sender or going to Preferences to change?

There's a free application from Spike Software called Audio Switcher. After you launch the program an icon shows up in the top menu bar that allows you to switch between W3 and your built in computer speakers. Works great!

I want to use the W3 to send music from my Squeezebox Radio to your A5+ powered speakers. Can I use the W3 with a music source other than my computer?

Absolutely! Many of our customers use the W3 with their MP3 players, stereo receivers, CD players, powered speakers, satellite radios, etc. The W3 Sender and Receiver units connect to any gear that has an audio input and output (or headphone jack).

Will the W3 Wireless Audio Adapter accept an amplified speaker signal from a power amp?

The W3 replaces any "line-level" RCA or mini-jack audio cable but is not designed to connect directly to powered speaker outputs.

What is the lowest frequency that the W3 will pass? I want to make my subwoofer wireless and need to confirm they will transmit a low frequency signal, i.e. down to 20Hz.

The W3 will easily handle low frequencies and is designed to transfer all music without any compression of loss. If I have the W3 can I send audio to my passive rear channel surround speakers? Sure, as long as you have a power amplifier to power your passive speakers, the W3 will work.

I use Apple's "Remote" application on my iPhone to control iTunes on my MacBook Pro but can I also use your W3 wireless adapter to get music from my computer wirelessly from my computer out to my stereo?

Yes, you can control iTunes with your iPhone and then send music from your Mac or PC out to your stereo system with the W3. Think of the W3 as an inexpensive way to get really high-quality wireless audio anywhere around the house. And no need to buy new gear as you can connect the W3 to all of your existing audio components.

The Audioengine W3 has 2 USB connectors, how do those work?

The USB connector on the Sender transmits USB audio from your computer OR you can plug any input into the audio connector on the other end (an iPod, stereo, etc.). The Receiver part is powered by a USB power supply or charger and sends out analog audio. Just keep in mind the W3 will work anywhere you want to replace an RCA cable or 1/8" mini-jack cable with wireless! If i purchase multiple W3 sets will they interfere with each other when used in the same setup? Up to 8 W3 sender receiver pairs will play well together as long as you keep a minimum of 6 inches between each unit.

W3 Troubleshooting Tips

Check to make sure that the power supply is properly connected to AC power. If using the W3 to get music from your computer do not connect the mini­jack cable from the W3 to your computer's headphone jack. Instead use the USB audio output. Verify that your audio source is playing music and that all of your connections are inserted correctly. If one of the cables is not plugged in all the way, you may only hear audio through one channel so unplug the cables in your setup and reconnect to verify. Repeat the Sender/Receiver pairing process within 5 feet of each other. Unplug the W3 from your computer and restart. Test the W3 with your system again. Test your W3 with a different computer/setup at a different location. 


Try changing the channel of your Wi­Fi router to 1 or 11. This can be done with an Apple router using Airport Utility software. On most other routers, these settings can be accessed by logging on to the routers IP address through a web browser. Keep as much room between the W3 sender and receiver units, and other wireless devices as possible. At least 2 or 3 feet is recommended. Temporarily move the powered W3 sender unit as close as possible to your wireless router. Leave it there for just a few minutes, and then place it back into your setup and retest. This may allow the W3 to train itself to "steer clear" of the signal. We have found that every now and then the placement of the computer's antenna in relation to the USB port can have an effect on the W3. One thing you could try is to move the W3 further from the computer by using a USB extension cable. If using a Mac laptop, try the USB port furthest away from the display (the display is where the wifi antenna is located). Consider upgrading to a new wireless router if yours is 3 or 4 years old. Newer model routers handle interference much better than older routers. Routers operating on the 5GHz band won’t interfere with the W3s operation at all. If the problem persists please provide us with the results of your troubleshooting. Please also include the date, purchase location, and serial number for warranty purposes. If you live outside of the continental US you will need to contact your dealer or our distributor in your country for further assistance. 

The Gadgeteer - W3 Review

...the sound quality was equal to or slightly better than AirPlay. 

IT Enquirer - W3 Review

The Audioengine W3 performed nicely. Indeed, there was no noise, no dropouts, and no static.

soundstagexperience.com - W3 Review

Honest-to-goodness, CD-quality, wireless sound for $149. Simple, inexpensive, functional -- both thumbs way up. Nice job, Audioengine. 

Leave a comment (Sign in)

Other products categories