24-Bit DAC/Headphone amp. Finish: Silver.
3 year warranty
- Connect D3 to a USB port on your Mac or PC and send high-quality music to your headphones or any audio system.
Portable USB audio converter for Mac or PC
Stream bit-perfect native 24/96 HD audio
High-performance headphone amp included
Plug-and-play, no drivers or software to install
Connect headphones or any music system
Easily drives low impedance headphones
Computer OS volume control
Asynchronous data transfer with dual master clocks
HD indicator for sample rates above 48K
Metal injection molded (MIM) aluminum case
Any computer, Mac or PC
Any music system with audio inputs (RCA or minijack)
1/4” headphone adapter cable
Product line brochure
The heart of the D3 is the AK4396 DAC, well regarded for its low noise and high fidelity. Due to the high signal-to-noise specs of the AK4396 and the added benefit of double redundancy power source conversion and filtering, the D3 presents impressive low noise and low distortion characteristics. The D3 can process digital audio at any bit depth up to 24 bits and any sample rate up to 192kHz. D3 pads (upsamples) all bit depths internally to 24 bits, thus achieving a higher signal-to-noise ratio.
The D3 contains a high-performance headphone amplifier based on the LME49726 low-noise opamp. This amp is able to provide low-impedance, high-fidelity audio and a 2-volt output which easily drives a wide range of headphones, including headphones with impedances as low as 12 ohms. The D3’s relay-controlled stereo outputs can also be connected to any system with an analog audio input, such as Audioengine powered speakers, for example.
The D3 is powered directly from the USB bus and power is passed through two stages of regulation to ensure no USB bus power variations affect the audio quality. This low-noise, low-ripple power supply is located on a separate circuit board for extra isolation and thermal management.
Volume is controlled from the computer’s OS and is implemented in the D3 as a digitally-controlled analog volume control.
Yes! You will need an Apple USB camera adapter, and a self powered USB hub. We've tested this with the D-link DUB-H4 and DUB-H7, and it works well. Here's an example of how this would be connected:
iDevice w/ USB Camera Adapter --USB-> Powered hub --USB-> D3 --Mini-> Speakers/Headphones
D3 can easily drive headphones with impedances as low as 10 ohms.
The D3 is a USB Plug-and-Play audio device. This means that the drivers it uses are developed and provided by the developer of your computers operating system. In the case of a Windows PC for example, these drivers are provided by Microsoft, and are a part of Windows.
The D3 is essentially a very high end external sound card. Its components and implementation make it more capable than what might be built in to a computer, not to mention the benefit of moving those sensitive components external to the potentially noisy interior of your computer. All of this means the signal your speakers receive will be clearer, with a lower noise-floor, and with a more pronounced dynamic range over your internal sound card.
Plug the D3 into a USB port on your computer (If possible, pick the higher speed port), and plug your headphones, powered speakers, or stereo system into the minijack output at the end of the D3. If using a Mac, go to System Preferences/Sound, and select "Audioengine D3". If you're using a PC, no setting changes are needed as the computer will automatically find the USB driver. Now play music from iTunes or your favorite media player and that's it - setup really is that easy.
The primary volume adjustment for D3 is the system volume. This interacts directly with circuitry in the D3 to control volume at the output. You can also use the volume control of your media player, but this (if implemented incorrectly) can potentially affect the digital signal out from your computer, so is considered less desirable.
When issues do crop up in USB audio, this is a common symptom. The PDF linked below outlines the issue and potential causes as well as some common fixes.
The D3 is asynchronous, using dual clocking circuits to provide the greatest possible isolation between the system clock and the D3 DAC clock.
Although D3 may work just fine when connected to most USB hubs, this is not recommended as the data rate may not be fast enough for higher-resolution music. We therefore suggest you select a high-speed USB bus all by itself and don't use a USB port on your keyboard, for example.
Yes, however, note that 24/96 HD digital audio pushes the limits of USB 1.1 speeds. Due to this it's highly recommended that you connect to a higher-speed USB 2.0 port.
If using a Mac, open the Audio MIDI Setup utility in Applications->Utilities, choose "Audioengine D3" under audio devices and check that the format is set to 96 and the bit depth is set to 24bit. Also a quick check is to simply observe the HD indicator on the D3 while music is playing. If the data rate of the digital signal being sent to the D3 is above 48K, then the HD indicator will be lit.
In the Foobar control panel, under Preferences->Output, set the buffer length to minimum. A few customers have mentioned that WASAPI mode is more stable when used under WinAmp, so try that as well.
A customer recommended an app called Soundsource - http://rogueamoeba.com/freebies - which is an easy way to switch between audio input and outputs as well as to access System Preferences and the Audio MIDI control panels.
Your D3 will sound great out of the box and will get better over time. We do generally recommend to play music for 40 to 50 hours first before doing any critical listening though.
Try removing all other USB devices temporarily, and try each USB port on your computer one at a time to see which one works best in your setup. USB audio needs quite a bit of bandwidth, so for best results ensure your D3 is on a "High-Speed" bus and not a "Full-Speed" bus.
When connected via USB with a computer, the D3 acts like a USB sound-card. Because of this, once it's set as your default playback device, it should work with any application on your computer playing audio, and with any file format the software supports.
Most of the USB ports on TVs and such are not meant for audio output, but serve other functions. As electronic components evolve, this may not always be the case. Check your operating manual for your device to see if the device supports USB audio. If so, the D3 may work, but as of late 2013 most of these ports do not support USB audio but are there for other reasons.
There are some excellent online computer audio forums and a quick search will turn up everything you need to know about the best hardware and software and how to get started on any budget. Computer audio is quickly evolving so we suggest to check and make sure the information you find is up to date.